Discussion in 'Egreat A5 Firmware' started by Rita, Jul 19, 2017.
...ordinary TV is 50hz not 100hz.
Anyway i will test some more tonight and see...
It means, there is no video issue with my IPTV with the latest firmware upgrade.
Noted about the VIDON, so there is no wrapper for egreat then.
Yeah, now you know i come from Himedia before.
Firstly, your TV doesn't have an 800 Hz Panel, it's just some marketing nonsense.
Second, I think that the Egreat player is sending a 60p signal to your TV and this is the reason why trumotion doesn't work.
So please report what framerate your TV is displaying. If it's really 60p you need to change the settings in the Egreat player.
marketing mix which works in practice! also I repeat - a matrix at me on 200 Hz, trumotion lifts possibly to 800 Hz at least 200 Hz - where they?
in settings only 1080-60gts... therefore I address the producer, but not people who have got used to usual 60 Hz. for you there is no difference, but I very much feel a difference!
Trumotion etc is never done by the player, but always by the display.
So set the Egreat so that you will get the native framerate as output (24p) and then the trumotion of your display will work again.
Thank you, factory reset helped me.
What is you TV with matrix on 200 Hz? Usually 3D TV have 100Hz matrix panel.
Between standard Blu-ray 3D is play 24Hz signal with frame in/out 24fps.
@E_CS some tv have native 200hz panel, indeed
I know some models top series of 2013/2014 claim to have 200Hz native panel. Witch one you know to have/proved 200Hz native panel or @Flafik have it?
at me old, but very much me favourite LG 47LM761T-... new models trumotion to 3000 Hz + is even better there. Test in practice, those who sits still on old - fall in love with movies anew) very much I want new lg oled 3d 4k HDR - but for me it is expensive.
I will try your councils soon. later I will unsubscribe
@Flafik / thanks
Firmware appears to be stable .
Good work Egreat .
@Rita I have understood that this matter in Firmware. About the TV everything is good - just they need to try to improve quality of reproduction of blyray3d ISO. A good example - old Firmware which was initially 220.127.116.11 there in general blyray 3D was bad and the picture was worse - now and the picture became more accurate, better, smoothness in more. And I have made noise because of the fact that occasionally probably some shots are processed worse - it sometimes is evident! 18.104.22.168 I was many times worse and now 12.3.0 almost super but still it is necessary to finish a little. Who doesn't trust me make tests on old Firmware. Please improve blu ray 3D iso. I very much believe in you! I will wait for new Firmware with improvement of quality of BLU RAY of 3D iso =)
just I use egreat A5 only 2 weeks - and there is a wish for high-quality viewing of movies - I see that you update the device and I hope for good result
Regarding Post 2.0 instruction, check here
@Rita don't you notice my messages at all?
@Flafik have you tried to clear data or factory reset? Please try this, and see whether will have a improved.
I say about what now is good, but there is a wish for a bigger optimization, now it is much better, than in the previous Firmware, but it isn't ideal. I hope in the following Firmware it will be even better than now. Remember old Firmware? - there in general it was many times worse - it is the fact!. We always look forward new stable versions of Firmware with improvements. that everything worked as the Swiss watch. Thank you =)
Dear All after updating the new firmware, egreat doesn,t keep the video resolution settings, if I put uhd 30htz for example, when i switch off the machine it will return to 1080p 60 htz. This didn't hapened with previous firmware. any suggestion? How do I do factory reset I mean to clear the settings back to factory.
i have the same issue. i need to change to uhd 60hz if i want to watch 4k movies. Imprex also cannot be changed when in HDR mode, it always say HDR SDR thingy.
Other than that, all is working so far.
@Mohd Izhar imprex WAS NEVER possible in HDR mode ! that was known long ago..
only the futur android 7 with new SDK will bring that possibility...
Separate names with a comma.