Is it possible to use H10 connected between other switcher and splitter ?

Discussion in 'H10 4K HDMI 2.0a Audio&Video Spliter' started by Jose Luis Goncalves, Apr 12, 2018.

  1. Jose Luis Goncalves

    Jose Luis Goncalves New Member

    Hi members,

    I would like to know if can I connect this H10 device in this way below ?

    - Four A/V Sources to one 4x1 Switcher and it to H10.
    - From H10 main output to other default 4K splitter 1x2 and each of its output to TV1 and TV2, both 4K.
    - From H10 audio output to my Home Theater LPCM 7.1 audio channels.

    Attached is a diagram about it.

    In this way, each source device would send video to both TVs (1080p or 4K) and also audio to HT (2.0, 5.1 or 7.1), depending on the selection made on the 4K switcher.

    Is it possible ?

    Thank you in advance.

    upload_2018-4-12_18-30-46.png

    Attached Files:

  2. Richard Xu

    Richard Xu Administrator Staff Member

    Theoretically, Yes .
    But actually it depends on the direct distance between every device .
    If the distance is relatively long, the HDMI long-term transmission will be attenuated,
    Also since there will be several levels of the intermediate transfer , to see if there is signal or no singal , you may need to try it first , and see how it goes in actually used.
  3. Jose Luis Goncalves

    Jose Luis Goncalves New Member


    Hi Richard Xu, thank you for answer...

    Usually I don't use longer cables than 1.8 meters due to HDMI restrictions. See new image with cable types and lengths.
    My main fear would be about the EDID generated by the H10 to be returned to video/audio sources, I hope H10 uses EDID video for 4K@60hz HDR and 7.1 channels audio. Do you know about EDID management in H10 ?
    Today when I connect my 4K Splitter to split A/V signal from Switcher and to one TV and one HT, I only got HDR with 5.1 or non HDR with 7.1, I never got full signal HDR with 7.1 because Splitter solve EDID either from TV (HDR / 5.1 ARC) or from HT (1080p non HDR / 7.1 LPCM).
    I am trading H10 in futeko.com store, but before I need be sure about it will work correctly in my TV room... if you have more information about it I will appreciate.

    Thank you in advance.

    upload_2018-4-17_1-16-58.png

Share This Page